| 200 Series |
|
300 Series |
200 Series Series panels are used as exterior walls on industrial and cold storage buildings where a fluted exterior profile is recommended. The interior minor rib profile provides a clean, flat appearance. Panels may either be through fastened or installed with a hidden structural clip as shown above.
|
|
300 Series Series panels with minor ribs on both facings are used as interior walls, partitions and suspended ceilings where temperature controlled environments are required.
|
Exterior Face:
26 gauge stucco embossed G-90 galvanized steel with standard in-stock Durafin 2000™ finish.
|
|
Exterior Face:
26 gauge stucco embossed G-90 galvanized steel with standard in-stock Durafin 2000™ finish.
|
Interior Face:
26 gauge stucco embossed G-90 galvanized steel with Imperial white Durafin 2000™ finish.
|
|
Interior Face:
26 gauge stucco embossed G-90 galvanized steel with Imperial white Durafin 2000™ finish.
|
| 300 Series A |
|
300 Series GS |
300 Series A exterior wall panels with bold, Azteco® embossing provide the look of masonry stucco for the cost of a metal panel.
The flush profile is flat with no striations or ribbing. It is the only 26 gauge flush metal wall panel system available in a 42" width for optimum erection efficiency.
The interior side features a minor rib profile that provides a clean, flat appearance and is easily washable.
|
|
Granitstone® combines the many advantages of lightweight insulated panels with the architectural appearance of sprayed stucco.
300 Series GS panels provide a flush profile using acrylic aggregate stucco finish factory applied over primed steel facings.
The interior side features a minor rib profile that provides a clean, flat appearance and is easily washable.
|
Exterior Face:
26 gauge Azteco® embossed G-90 galvanized steel with standard in-stock Durafin 2000™ finish.
|
|
Exterior Face:
24 gauge Azteco® embossed G-90 galvanized steel with Granistone® sprayed stucco finish.
|
Interior Face:
26 gauge stucco embossed G-90 galvanized steel with Imperial White Durafin 2000™ finish.
|
|
Interior Face:
26 gauge stucco embossed G-90 galvanized steel with Imperial White Durafin 2000™ finish.
|
| 300 Series R |
|
200 Series/300 Series/300 SeriesA/300 SeriesGS/300 SeriesR |
300 Series R panels with a striated profile create an architectural appearance with subtle shadows.
The nearly flat profile creates a highly attractive linear apparance with striking aesthetic appeal and excellent thermal performance. It is expressly designed for the upscale commercial/industrial market.
|
|
Core:
Foamed-in-place polyurethane 2, 2.5, 3, 4, 5, and 6".
|
Joint:
Off-set interlocking tongue and groove with concealed fastening.
|
|
Width:
42"
|
Length:
48' standard maximum
|
|
INSULATING
EFFICIENCY
|
|
Thickness
(In)
|
2 |
2.5 |
3 |
4 |
5 |
6 |
|
R-Value
|
17 |
21 |
25 |
33 |
41 |
49 |
|
Exterior Face:
26 gauge stucco embossed G-90 galvanized steel with standard in-stock Durafin 2000™ finish.
|
|
Interior Face:
26 gauge stucco embossed G-90 galvanized steel with Imperial White Durafin 2000™ finish.
|
|
|
|
| 400 Series V-Wave |
|
600 Series |
Possessing modern European lines with a hint of classic “retro” styling, this panel is designed for the more sophisticated commercial/industrial project. The unique joint geometry creates complete continuity of the wave profile.
North America’s only sinewave profile foam core insulated panel. The continuous sweeping profile creates beautiful shadowing effects. The AP 400 Series V-Wave is available in stucco embossed or smooth (minimum 24 gauge required for smooth). The panel exterior is also available in 24 and 22 gauge facings where extra durability is required.
|
|
The 600 Series Fire Rated panels are produced on MeTecno USA-API Division’s continuous mineral wool production line-the only one of its kind in North America. The line produces panels of unsurpassed quality, consistency and volume.
The core material is non-toxic, does not release gases in a fire and has a smoke developed rating of zero. It is also water repellent, free of (H)CFCs and recyclable.
Standard rib configuration is minor rib on both exterior and interior facings. This profile provides a clean, flat appearance that is easily washable. The 600 Series Fire Rated panel is also available with Azteco®, Striated and Granitstone® exterior profiles.
|
Exterior Face:
Standard is 26 gauge stucco embossed G-90 galvanized steel with PPG Duranar PVDF high performance coating system.
|
|
Exterior Face:
Standard is 26 gauge stucco embossed G-90 galvanized steel with standard in-stock Durafin 2000™ finish.
|
Interior Face:
Standard is 26 gauge stucco embossed G-90 galvanized steel with PPG Durafin 2000™ finish.
|
|
Interior Face:
Standard is 26 gauge stucco embossed G-90 galvanized steel with Imperial White Durafin 2000™ finish.
|
|
|
Panel Thickness:
2”, 3”
|
|
Panel Thickness:
4”, 6”
|
R-Value by ASTM C1363:
18, 27
|
|
R-Value by ASTM C236:
15, 23
|
Core:
Foamed-in-place urethane
|
|
Core:
Laminated lamella style rockwool core
|
Joint:
Interlocking parallel tongue and groove.
|
|
Joint:
Interlocking tongue and groove
|
Width:
39-3.8”
|
|
Width:
42”
|
Length:
48’-0”
|
|
Length:
40’-0” maximum
|
